This is an Ontap 8.3.1 custer.
I can't find a way to add the default gateway to a svm - I have the following svm that exists but was set up without a gateway on a shared lif:
'
So, several svms share this lif. For some reason the cifs svm was set up on the same VLAN as the nfs svm. I can ping 10.2.48.101 from outside the subnet but not 10.2.48.101.
netapp-clr01::network interface> show lif1 Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- netapp-cifs01 lif1 up/up 10.2.48.101/24 netapp-clr01-01 a0b true netapp-iscsi01 lif1 up/up 10.2.50.100/24 netapp-clr01-01 a0c-226 true netapp-nfs01 lif1 up/up 10.2.48.102/24 netapp-clr01-01 a0b true 3 entries were displayed.
netapp-clr01::> network routing-groups show -routing-group d10.2.48.0/24 Routing Vserver Group Subnet Role Metric --------- --------- --------------- ------------ ------- netapp-cifs01 d10.2.48.0/24 10.2.48.0/24 data 20 netapp-nfs01 d10.2.48.0/24 10.2.48.0/24 data 20 2 entries were displayed.
How do I set up a default gateway for ths nfs svm? Why can I ping the cifs svm and not the nfs svm is they share the same routing group?
Solution HERE: https://library.netapp.com/ecmdocs/ECMP1610202/html/network/route/create.html