Hello,
I am running ontap 9.7 and I am trying to figure out if there is a way to connect to a lif that is in a different vlan.
To give some background on our network it is set up like this with firewall open from workstations to servers in each department
10.10.20.0/24 = Department A workstations
10.10.25.0/24 = Department A Servers
10.10.30.0/24= Department B workstations
10.10.35.0/24 = Department B Servers
My networking Team is requesting that we mount our CIFS shares on our workstations through IPs in the server subnets to keep non workstation things off of the workstation subnets.
Our set up on the netapp side currently looks like this.
we have ports e0c and e0d aggregated into a0a on both nodes and ports e0e and e0f aggregated into a0b on both nodes.
we then have VLANS set up on all 4 aggregated ports. ie a0a-20 a0a-25 a0a-30 a0a-35 on all 4 aggregated ports.
As far as I can see the VLANs are supposed to prevent traffic going between them. So is there a way for me to get the a workstation in vlan 20 to mount a share in vlan 25?
Thank you for any guidance you have!