Hello Guys,
We just set up a FAS2720. We attached some disk shelves from an older system to the controller after unowning them, but we realized that there were 4 disks that still pointed to the old controller. So we performed a disk zeroing on the first controller; that was successful, but on the second controller the process is stuck in a loop of rebooting. It cannot find any disk, not even the ones on the FAS2720 controller. This is what we have been getting over and over:
Oct 19 16:25:29 Power outage protection flash de-staging: 46 cycles
***OS2SP configured successfully***Oct 19 16:26:19 [localhost:cf.ic.sbb:notice]: HA interconnect: SBB Compatibility Event. Compatible partner node found. The interconnect device has been enabled.
Oct 19 16:27:20 [localhost:fal_nvme.partition.status:notice]: Partition 0-1 with capacity 894 GiB status: online.
Oct 19 16:27:53 [localhost:config.noPartnerDisks:error]: No disks were detected for the partner; this node cannot perform takeover correctly.
Oct 19 16:27:53 [localhost:callhome.dsk.config:error]: Call home for DISK CONFIGURATION ERROR
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 GCM, AES-256 GCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.
cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-XTS 128, AES-XTS 256' passed.
cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
Oct 19 16:27:55 [localhost:raid.autoPart.disabled:notice]: Auto-partitioning is disabled on this system: the system needs a minimum of 8 usable internal hard disks.
WARNING: 0 disks found!
Storage Adapters found:
0 Fibre Channel Storage Adapters found!
2 SAS Adapters found!
0 Parallel SCSI Storage Adapters found!
0 ATA Adapters found!
Select option 4 from the boot menu to choose disks for the root volume and spare core space.
Target Adapters found:
4 Fibre Channel Target Adapters found!
0 iSCSI Target Adapters found!
WARNING: there do not appear to be any disks attached to the system.
No root volume found.
Rebooting... (press ctrl-c during boot to break reboot loop)
Uptime: 3m23s
System rebooting...
BIOS Version: 11.5
Portions Copyright (C) 2014-2018 NetApp, Inc. All Rights Reserved.
Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...
CPU = 1 Processor(s) Detected.
Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz (CPU 0)
CPUID: 0x00050664. Cores per Processor = 12
32768 MB System RAM Installed.
SATA (AHCI) Device: SV9MST6D120GLM41NP