New AFF-250 running 9.8P1. Dual controllers
Port channel e2a and e2c - Vlan for SVM, CIFS, NFS - Failover enabled
Access Port e2b - vlan iSCSIA - no failover, uses MPIO for HA
Access Port e2d - vlan iSCSIB - no failover, uses MPIO for HA
In this configuration, the iSCSI LIFs for node na2-01 are unreachable. If I migrate any LIF (CIFS/NFS/SVM) over to na2-01 the iSCSI LIFs are reachable again. Would like to know why the port channel LIFs location would have an affect on the non-port channel LIFs reachability?
na2::> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
na2-01_clus1 up/up 169.254.247.99/16 na2-01 e0c true
na2-01_clus2 up/up 169.254.233.167/16 na2-01 e0d true
na2-02_clus1 up/up 169.254.207.68/16 na2-02 e0c true
na2-02_clus2 up/up 169.254.190.207/16 na2-02 e0d true
na2
cluster_mgmt up/up 10.254.0.210/24 na2-01 e0M true
na2-01_mgmt1 up/up 10.254.0.211/24 na2-01 e0M true
na2-02_mgmt1 up/up 10.254.0.212/24 na2-02 e0M true
na2-svm1
lif_na2-01-cifs up/up 10.131.20.211/24 na2-02 a0a-202 false
lif_na2-01-iscsia up/up 10.131.3.211/24 na2-01 e2b true
lif_na2-01-iscsib up/up 10.131.4.211/24 na2-01 e2d true
lif_na2-01-nfs up/up 10.131.5.211/24 na2-02 a0a-1315 false
lif_na2-02-cifs up/up 10.131.20.212/24 na2-02 a0a-202 true
lif_na2-02-iscsia up/up 10.131.3.212/24 na2-02 e2b true
lif_na2-02-iscsib up/up 10.131.4.212/24 na2-02 e2d true
lif_na2-02-nfs up/up 10.131.5.212/24 na2-02 a0a-1315 true
lif_na2-svm1_mgmt up/up 10.131.1.211/24 na2-02 a0a-1311 false
16 entries were displayed.