Hi Folks,
Is there any specific user guide to configure NDMP with veritas netbackup 8.3. I have already gone through all sort of documentation on netapp. Can some one answer my below questions.
We have AFF400 for which i have LACP 2 ports (e0f/e0h as a0b) which are of 10Gb each and created separate broadcast domain. Does LACP works on the NDMP backup with veritas?
1. I have currently tapes drives configured with Hitachi NAS now, can we use the same tape drives to configure NDMP on netapp. Will there be any issues or errors with current tape drives which is working fine on HNAS?
If so how exactly the zoning should be done ( Tape Drives and Netapp ports zoning since i use LACP can i add both the ports on each node and make one zone per node). Is this the correct way ?
2. Is it mandatory to create intercluster LIF's?
3. LIF assigned should be in the same IP range as the backup network?
4. Any requirement that we should use Accelerator for NDMP from Netbackup ?
PS:-- For NetApp filers, Accelerator for NDMP supports only the DUMP format. Consult your NetApp documentation for specific details about its DUMP format.
prod prod-01_mgmt1
up/up 10.10.50.100/24 prod-01 e0M true
prod-02_mgmt1
up/up 10.10.50.102/24 prod-02 e0M true
cluster_mgmt up/up 10.10.50.103/24 prod-01 e0M true
vserver1
datalif10 up/up 10.10.100.20/24 prod-01 a0a true
vserver2
datalif20 up/up 10.5.197.61/24 prod-02 a0a true
Appreciate your help.