Hello Guys
I have a storage with Ontap 9.7 p9 and I need to enable ADP. The Storage is already configured, only with Management, it does not have any configuration yet, and I have read that to enable ADP the cluster must be reinstalled again.
I have no problem reconfiguring the Storage, but I would like to know what the order of configuration is. What I have reviewed and the first thing is to enable ADP in both nodes, then once enabled, the clean must be done (option 4 of the Boot Menu)
The order I have reviewed is as follows
- Reboot node2
- Enter the Boot Menu
- Select option 9
- Then option 9a
- Then option 9b
- Restart the node
- Repeat process node 1
Enter the boot menu again node 1
- Select Option 4
- Reconfigure the cluster
Repeat process node 2 and add to cluster
Is correct the process, or is posible enable ADP without reinstall
Thanks for your comments.