Quantcast
Channel: ONTAP Discussions topics
Viewing all articles
Browse latest Browse all 4948

Ontap 9.8 The link aggregation port is down

$
0
0

We have a fresh installation of 9.8P7 in a switchless dual node FAS8020.

The desired network setup that i am trying to create is SVM with ISCSI.

 

Controller 1

2 ports e1a, e1b  > If Group > Vlan  1201 > Logical Interface with ip 10.100.10.1/24

Controller 2

2 ports e1a, e1b  > If Group > Vlan  1201 >Logical Interface with ip 10.100.10.2/24

 

Immediately after creating Link Aggregation Group from giu or cli the ifgroup is down. "The link aggregation group is down"

The individual ports are up.

Because group is down i believe vlan is down , lif is down as well. I tried to add and removed Broadcast domain info from group, bring it up / down it stays down nonmatter what i do.

 

I can create lifs directly on physical ports then svm can use them and everything is connected, however i rather use interface group.

 

Here is some cli info:

 

 

 

 

NJFAS8020::> network port ifgrp show Port Distribution Active Node IfGrp Function MAC Address Ports Ports -------- ---------- ------------ ----------------- ------- ------------------- NJFAS8020-01 a0a ip 02:a0:98:a2:75:09 none e1a, e1b NJFAS8020-02 a0a ip 02:a0:98:a2:a3:e6 none e1a, e1b 2 entries were displayed.

 

 

 

 

 

 

 

NJFAS8020::> network port show Node: NJFAS8020-01 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- a0a Default Data down 1500 -/- - a0a-1201 Default Data down 1500 -/- - e0M Default Default up 1500 auto/1000 healthy e0a Cluster Cluster up 9000 auto/10000 healthy e0b Cluster Cluster up 9000 auto/10000 healthy e0e Default - down 1500 auto/- - e0f Default - down 1500 auto/- - e1a Default - up 1500 auto/10000 healthy e1b Default - up 1500 auto/10000 healthy Node: NJFAS8020-02 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- a0a Default Data down 1500 -/- - a0a-1201 Default Data down 1500 -/- - e0M Default Default up 1500 auto/1000 healthy e0a Cluster Cluster up 9000 auto/10000 healthy e0b Cluster Cluster up 9000 auto/10000 healthy e0e Default - down 1500 auto/- - e0f Default - down 1500 auto/- - e1a Default - up 1500 auto/10000 healthy e1b Default - up 1500 auto/10000 healthy 18 entries were displayed.

 

 

 

 

 

 

 

NJFAS8020::> network interface show -vserver svm_iscsi Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- svm_iscsi NJFAS8020-01_lif_svm_iscsi up/down 10.100.10.1/24 NJFAS8020-01 a0a-1201 true NJFAS8020-02_lif_svm_iscsi up/down 10.100.10.2/24 NJFAS8020-02 a0a-1201 true 2 entries were displayed.NJFAS8020::> network interface show -vserver svm_iscsi -lif NJFAS8020-0 NJFAS8020-01_lif_svm_iscsi NJFAS8020-02_lif_svm_iscsi NJFAS8020::> network interface show -vserver svm_iscsi -lif NJFAS8020-01_lif_svm_iscsi Vserver Name: svm_iscsi Logical Interface Name: NJFAS8020-01_lif_svm_iscsi Service Policy: default-data-blocks Service List: data-core, data-iscsi (DEPRECATED)-Role: data Data Protocol: iscsi Network Address: 10.100.10.1 Netmask: 255.255.255.0 Bits in the Netmask: 24 Is VIP LIF: false Subnet Name: - Home Node: NJFAS8020-01 Home Port: a0a-1201 Current Node: NJFAS8020-01 Current Port: a0a-1201 Operational Status: down Extended Status: This LIF is down because all failover targets are either down or otherwise unavailable. Use the "network interface show -failover" command to review the LIF's failover configuration. Is Home: true Administrative Status: up Failover Policy: disabled Firewall Policy: data Auto Revert: false Fully Qualified DNS Zone Name: none DNS Query Listen Enable: false Failover Group Name: Data FCP WWPN: - Address family: ipv4 Comment: - IPspace of LIF: Default Is Dynamic DNS Update Enabled?: false Probe-port for Cloud Load Balancer: - Broadcast Domain: Data Vserver Type: dataNJFAS8020::> network port show -node NJFAS8020-01 -port e1a Node: NJFAS8020-01 Port: e1a Link: up MTU: 1500 Auto-Negotiation Administrative: true Auto-Negotiation Operational: true Duplex Mode Administrative: auto Duplex Mode Operational: full Speed Administrative: auto Speed Operational: 10000 Flow Control Administrative: full Flow Control Operational: full MAC Address: 00:0e:1e:c8:85:b0 Port Type: physical Interface Group Parent Node: NJFAS8020-01 Interface Group Parent Port: a0a Distribution Function: - Create Policy: - Parent VLAN Node: - Parent VLAN Port: - VLAN Tag: - Remote Device ID: - IPspace Name: Default Broadcast Domain: - MTU Administrative: 1500 Port Health Status: healthy Ignore Port Health Status: false Port Health Degraded Reasons: - Virtual Machine Network Name:

 

 

 

 

 

 

 

NJFAS8020::> network port show -node NJFAS8020-01 -port a0a Node: NJFAS8020-01 Port: a0a Link: down MTU: 1500 Auto-Negotiation Administrative: - Auto-Negotiation Operational: - Duplex Mode Administrative: - Duplex Mode Operational: - Speed Administrative: - Speed Operational: - Flow Control Administrative: - Flow Control Operational: - MAC Address: 02:a0:98:a2:75:09 Port Type: if-group Interface Group Parent Node: - Interface Group Parent Port: - Distribution Function: ip Create Policy: multimode_lacp Parent VLAN Node: - Parent VLAN Port: - VLAN Tag: - Remote Device ID: - IPspace Name: Default Broadcast Domain: Data MTU Administrative: 1500 Port Health Status: - Ignore Port Health Status: false Port Health Degraded Reasons: - Virtual Machine Network Name:

 

 

 

 

I would appreciate any pointers.

 


Viewing all articles
Browse latest Browse all 4948

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>