All,
I have been running a Snapmirror for a few days. Something happened and my logs showed: Current Transfer Error: cannot connect to source filer
I checked a few things but could not understand why this happened. In my head i though that a new 'initialize' would maybe help me.
So, i started a new snapmirror initialize and as seen below my volume is now in a siutiation where i can not get it back online and check my status, resync etc.
So my questions is as follows:
Is there something i can do to, Exit the restricted mode, resync my volumes and get back to where the system was before my initialize?
Snapmirror status today:
Source: ekbcon_2:cdedata02
Destination: FILER2:cdedata02_dest
Status: Idle
Progress: -
State: Unknown
Lag: 21:24:24
Mirror Timestamp: Mon Apr 25 12:58:02 CEST 2016
Base Snapshot: FILER22(0123456789)_cdedata02_dest.47
Current Transfer Type: Retry
Current Transfer Error: volume is not online; cannot execute operation
Contents: Replica
Last Transfer Type: Scheduled
Last Transfer Size: 1372 KB
Last Transfer Duration: 00:00:03
Last Transfer From: ekbcon_2:cdedata02
FILER2> vol online cdedata02_dest
vol online: Volume 'cdedata02_dest' does not contain a valid filesystem.
That can happen as a result of an aborted vol copy or an aborted
snapmirror initial (level 0) transfer.
In order to bring it online, you must either destroy and re-create
the volume, or complete an initial snapmirror transfer or vol copy.
Snapmirror status before my initilize:
FILER2> snapmirror status -l
Snapmirror is on.
Source: ekbcon_2:cdedata02
Destination: FILER2:cdedata02_dest
Status: Idle
Progress: -
State: Snapmirrored
Lag: 00:58:27
Mirror Timestamp: Mon Apr 25 12:58:02 CEST 2016
Base Snapshot: FILER2(0123456789)_cdedata02_dest.47
Current Transfer Type: Scheduled
Current Transfer Error: cannot connect to source filer
Contents: Replica
Last Transfer Type: Scheduled
Last Transfer Size: 1372 KB
Last Transfer Duration: 00:00:03
Last Transfer From: snapcon_2:cdedata02
FILER2> snapmirror status
Snapmirror is on.
Source Destination State Lag Status
snapcon_2:cdedata02 FILER2:cdedata02_dest Snapmirrored 00:58:59 Idle
FILER2>
/etc/snapmirror.conf
FILER2> rdfile /etc/snapmirror.conf
snapcon_2=multi(FILER1,FILER2)
snapcon_2:cdedata02 FILER2:cdedata02_dest compression=enable 30 0-23/4 * *