Hi all,
I am working on automation to monitor all 7mode/cmode storage systems we have by checking for netport port status. Through the automation, we want to check if the ports part of ifgroup are up and working, MTU settings and if there are any CRC errors.
Using NMSDK, i can get ifgroup and MTU details of the interfaces. I found no option to get CRC errors listed for an interface in the system. Is there any option we have to get CRC error details from netapp API?
RECEIVE
Frames/second: 25446 | Bytes/second: 16472k | Errors/minute: 0
Discards/minute: 0 | Total frames: 137g | Total bytes: 281t
Total errors: 0 | Total discards: 0 | Multi/broadcast: 0
No buffers: 0 | Non-primary u/c: 0 | L2 terminate: 0
Tag drop: 0 | Vlan tag drop: 0 | Vlan untag drop: 0
Vlan forwards: 0 | Vlan broadcasts: 0 | Vlan unicasts: 0
CRC errors: 0 | Runt frames: 0 | Fragment: 0
Long frames: 0 | Jabber: 0 | Bus overruns: 0
Queue drop: 0 | Xon: 0 | Xoff: 0
Jumbo: 2833m