Without show "vtic", is that normal?
I remember where should be alway a "vtic" after logged in, and along with a port number, in (logged in). How come don't I see it in the following command? I am using 8.3.1 Thanks! cluster::> igroup...
View ArticleCIFS Error: Nblade.cifsMaxWatchesPerTree: Received too many Change Notify...
I've recently started getting these errors: Nblade.cifsMaxWatchesPerTree: Received too many Change Notify requests on one tree: clientIP:port 192.168.1.51:57914, directory "<directory>" on share...
View Articleforce delete SVM - ipspace shows SVM-name
Hello I'm not managing to delete a SVM because it linked to DEFAULT ipspace that is being using by other resource. There is a way to force delete SVM? Thank you very much. -MRF
View ArticlecDOT - Using mixed SAN / NAS SVMs
While cDOT SVM/Vservers have always allowed any mix of NAS and SAN protocols, over time a 'best-practice' seems to have developed that one should keep these two types of protocols segregated in...
View ArticleNetApp 7Mode, how to add AD group permission to a folder using .net API or...
Hello All, I need to add a AD group (read/write) access to the folder created inside the cifs shares. I knew fsecurity will show the details like which are all AD groups have access to particular...
View Articlemoving CIFS data from dual controller to single controller in 7 mode with Shares
Hi We have requirement, where customer wants us to move CIFS data from two controller to single controller by snapmirror and to maintain share and folder permissions. Can i copy contents from...
View ArticleAssigning disk to cluster after disk replacement
Hello NetApp Community, Pardon the ignorance. We have cluster netapp 8.3P1 and one disk failed. It has been replaced but the disk is showwing as unnassign. I am not so sure what command/syntax to use...
View Articlewhta is the right way to check out history of commands?
./mlog/command-history.log is the right one?There are a lot in it, and doesn't seem covering everything.
View Articleerror alert
Hi Guys, I have error alerts which says "Disk shelf 12 is connected to HBA ports 2a and 2b which are both controlled by a single chip." what does this mean . On the controller if i run sysconfig -a ,...
View Articleuse disks from another head
Hi , We have few loaner disks connected to a C mode 8020 and it still shows with the loaner controller node name , how do i move it to the new 8020 contoller nodes?
View ArticleMultiple series error
Hi I've finally got Grafana/Graphite/Harvest working for one of my 8040 clusters. I did have a few issues along the way but my current problem is that under the NetApp Cluster Dashboard I don't see...
View Articleupgrade advisor shows incorrect OS instead of 8.1.2 7-MODE it shows "mainN"...
customer has filer ser 700001466714when using the upgrade advisor it says Current OS "mainN" this value cannot be modifiedthey are actualy on 8.1.2 7-MODE and want to upgrade to 8.2.4 but cannot get...
View Articlecluster peer rpc timeout
Create cluster peer fails with RPC error timeout. I have 2 clusters that I need to peer , the peering fails with An introductory RPC to the peer address "addr" failed to connect: RPC: Remove...
View Articleno vserver option in New-NcSnapshotPolicy cmdlet?
I'm trying to automate creating snapshot policies with Powershell. It looks like the New-NcSnapshotPolicy cmdlet doesn't have a vserver option. So when I run it, all policies are created under the...
View ArticleAny special requirement to reboot node1 and node2 if Master for RDB's is all...
Two HA's cluster, HA1: node1&node2; HA2: node3&node4 Any special requirement to reboot node1 and node2 (by failover/failback), if all RDB's masters are located on node1? for instance, Do I hve...
View ArticleOntap 8.3.2 7 Mode Find utilized SAS Volume
Hi there, we are running a ha-pair on 2240-2 and have about 20 volumes (2TB each) on both controllers. The volumes are used by VMware via NFS. How do i find utilisation of 1 specific volume if i have...
View ArticleSpecified volume credenticals
Hello,Back to 7 mode, I knew that there isn't any option to create a Read Only role, which lets you view only a specific volume's status at the volume list, and the other volumes won't appear.By that I...
View Articledisk slicing
Hi, I have a questions for FAS2554. Find some documents that for FAS2550 types, disk slicing can get value. For the initial, DS can be done. But if later, more disk shelves need to be added, does it...
View Article