Snapmirror stuck at 100gb in 7 Mode
Hi All, I know this question has been in this discussion forum but it didnt help me out. I have tried breaking and resyncing the relationship but still it gets stuck at 100 gb and even sometimes it...
View ArticleWhere to place SVM root volume?
Hi there, I have an envioremnt in which I have a SAS aggregate with flash pool (aggr1) and a SSD aggregate (aggr2), serving different purposes. Per node, of course. When creating my SVM (one per...
View ArticleVolume Language
Hi All, I am new to NetApp and was reading through admin guides. In "Logical Storage Management Guide" for version 8.3.2 page 17, it mentions that Language of the FlexVol volume cannot be changed. But...
View ArticleUnable to access .snapshot path from Windows 8/2012 R2 or later
Hi,It's been a while since this first happened. But now it's annoying. In our environment from Windows 2008R2/Windows 7 we can do \\filer\share\.snahshot. From Windows 2012 R2\Windows 8\10 i cannot...
View ArticleLoad sharing SVM root mirrors and ontap upgrades
Hi all, I've read that it is recommended to move LS mirror source volumes to an aggregate on a node to be upgraded last. Would it be sufficient instead to quiesce LS mirrors, NDU and then resume...
View ArticleStop Snapmirror for limited time
Hi Everyone, I want to upgrade DataOntap in 7-mode . I want to stop snapmirror before upgrade and after upgrade again start it . What is the best way to stop the snapmirror just for limited time . i...
View Articlecifs terminate -v Ontap 9
Hi guys, I have a cluster with 10 nodes in Ontap 9 and 100 volumes using cifs, i would like to do cifs terminate about 2 volmes .It is possible ? i can't find the command cifs terminate -v in Ontap 9,...
View Articlecan't pass home work of coure NOTAP Cluster Fundamental, modul Clustesr,...
Hi,I am studing the course ONTAP Cluster Fundamental for certification NS0-158. At the end of the lessone 1 in modul Clusters, I can't pass the home work. please see the picture as the attachment....
View Articlereallocation for voume on SSD aggregate
I have AFF8080EX with SSD shelves adn I have 5 shelves.The Ontap versizon is 9.0There are two SSD aggregates and one SSD aggregate is on one of controllers and the other is on another controller. Each...
View ArticleSVM DR Assistance
Hello. I am Trying to convert some existing snapmirror DP relationships to a SVM DR relationship per the article here:...
View ArticleClik here to view.
Volume Inconsistent
Hi,A couple days ago a volume into an aggregate reach the threshold and due this (I think) the volume became offline. I tried to put the volume online but i get this message "Volume...
View ArticleHelp with ONTap 9.1 routing
I am testing the waters with ONTap 9.1, and fired up a simulator version. Aside from the differences in commands, I cannot connect externally to, or from any of the addresses bar 1 - 10.xx.xx.214. I am...
View Articlevol move question
Hi, In order to move a volume to a different aggregate, the capacity on target is based on nominal size of volume or used size of volume (commited)? I have a volume with 4TB (used 2TB) on FAS8060 and I...
View Articlelsarpc sid lookups every 15 minutes from NetApp to AD DC
We have a ton of lookups occurring every 15 minutes from one particular LIF. I did a packet capture on the ifgrp that the lif uses to troubleshoot why a specific SID lookup failure is logged every 15...
View ArticleAdvice, please, on creating a hybrid aggregate?
Hi On a new 2650HA with 4 x 400GB SSDs and 20 x 1.2 TB SATA drives (as well as 24 SAS drives), how would you go about creating a hybrid aggregate from the SSDs and the SATA drives, please? From past...
View ArticleSyslog 7-Mode transition to C-Mode
Hi guys, on our 7-mode heads we head the following Syslog config: # Log messages of priority warning or higher to the console and all messages of info or higher to /etc/messages log file.# By default,...
View ArticleHow to get Volume Type using Powershell Toolkit
From the OnTap CLI, I can run this command to find out my volume type (it will be either RW or DP (for data protection)):vol show -vserver VserverName -volume VolumeName -fields...
View Articlevol move in vfiler root volume
Does "vol move" command works for vfiler root volume in 7 mode? i am looking for options to move vfiler root volume from one aggregate to another aggregate in same filer without disruption. ThanksSaran
View ArticleHaving problems upgrading to ONTAP 9.1
As per the Upgrade Advisor I am attempting to retrieve the new image file netapp1::> cluster image package get -url http://mywebserver.com/netapp/91_q_image.tgzSoftware get...
View ArticleDSM and Windows 2012 R2
Guys, our vendor has been using SnapDrive and the native Windows 2012 R2 MPIO component and says this is bets practice on this OS. We are using a mixture of 7-mode and C-mode. Is this best practice or...
View Article