ifgrp status in ONTAP 9.3
Hi All. Just noticed that command absentsystem node run -node * -command ifgrp statusWhich was quite useful for LACP troubleshooting.No longer available in ONTAP 9.3. Not sure for 9.1 & 9.2 but in...
View ArticleONTAP Select VMware and internal network
We are a VMware shop and use a distributed vSwitch for our networking. We have 10G switches connnected to the hosts with all ports configured to trunk the VLANs required for VMware. Our portgroups are...
View ArticleNew TR Release: TR-4651: NetApp SolidFire SnapMirror Architecture and...
This document provides an architectural overview for enabling a collaborative replication and DR solution with SnapMirror between NetApp SolidFire and NetApp ONTAP. SolidFire and ONTAP jointly...
View ArticleClik here to view.
No Oncammand System Manager after upgrade 9.3
Hello,Following the update in 9.3 I no longer have access to system eat on but cluster. I have three bay 2 FAS 2600 and one AFF200 and I have the same behavior. It remains to the load even when doing...
View ArticleAdvanced Drive Partitioning and data aggregate
Hello guys, we have FAS2554 with 48x 6Tb drives deployed with Advanced Drive Partitioning enabled. 24 drives per each controller I want to create 2 data aggreagtes one per controller.I know that I can...
View ArticleConvert an Existing SVM to SVM-DR
Let's say we have an SVM with total of 10 Volumes, and 5 of them is required to DR. I can either take out 5 no DR required volumes, and convert the SVM to SVM-DR. For these 5 no DR required volumes, I...
View ArticleSystem configuration backup files are not deleted on FTP server
Hello, We have configured a FAS8020 cluster running ontap 9.1P9 to upload configuration backup to a remote FTP server, using a system account on such server to access and create files. Backups are...
View ArticleFailover Group Join Error
Can anyone help me identify what the issue is here and profer the solution? Thanks. Cluster_node::> net interface failover-groups add-targets -vserver Cluste_node -failover-group 136.171.211.0/24...
View ArticleMaximum VIF for Snapmirror replica
Hi all, Just trying to solve a 60TB "problem", I've to replicate a 60TB volumen between our datacenters, two FAS8040 8.2.3 7Mode, the original idea is to do it with a mixed combination of FC / ETH...
View ArticleConvert FAS system to shelf DS4246
Hi!need help for planning change storage system from FAS2554 to FAS8200 without losing data (minimal). My customer have FAS2554 HA system (CDOT 8.3.2) with following configuration:Expansion:...
View ArticleOnTAP 9.2 and Windows Server 2003/iSCSI
Does anyone know if you can create an iSCSI LUN on Server 2003 and connect it over iSCSI to an 8080 system running OnTAP 9.2? The express guides assume 2008+ but it doesn't explicitly say it doesn't...
View ArticleDelete Volumes in SVM DR
Two FAS 8020, NetApp Release 9.1P6 with SVM DR configured. When a volume gets created on Site A SVM it then gets automatically replicated to Site B SVM. Site B SVM is not running until failover. A few...
View ArticleHP-UX San Boot Ontap 9
Looking for documentation to configure boot from SAN from a HP-UX Itanium HP rx2800 i4 Itanium Servers. 2port 8GB AH401A Qlogic HBA HPUX 11i V3. NetApp A300
View ArticleC-Mode MetroCluster Brocade 6505 configuration
I'm extremely confused by available documentation about Brocade 6505 in cDOT FMC. MetroClustr CIG port connection table presumes 24 ports are used. RCF currently avaialable for download also configure...
View ArticleDelete Volumes in SVM DR
Two FAS 8020, NetApp Release 9.1P6 with SVM DR configured. When a volume gets created on Site A SVM it then gets automatically replicated to Site B SVM. Site B SVM is not running until failover. A few...
View ArticleSVM with CIFS slow after 7MTT ?
Hi, is there anything going weird when a volume has been transitioned from 7 Mode to a new SVM on an 2650. Old System 2554 7 mode 8.1New System 2650 9.1P10 Funny thing is. AGGR is 12x 4TB Sata: My...
View ArticleMIBs and OIDs for Netapp 8.3.2
Hello All, Can someone help me with the MIBs and OIDs for NetApp C-mod 8.3.2 version. I have checked the links from netapp portal and its not helping. Our monitoring tool works with snmp traps not...
View ArticleReduced caching on Flash Pool aggregates after update to ONTAP 9.1
Hello, After a recent update from 8.3.2P10 to 9.1P10 on FAS 62xx systems, I noticed a major change in read caching patterns on existing Flash Pool aggregates. More specifically:the percentage of reads...
View ArticleAdmin State Stopped in SVM DR
We are having an issue. We have two clusters with SVM-DR Replications. When we create replication admin-state of replica is running.But when we break replication for testing porpuse and set it again,...
View ArticleAPI quota-list-entries-iter with quota-target parameter does not diplay the...
By Using the "quota-list-entries-iter" API with paratmeter quota-target returns only the Qtree Quota but not the user Quota. I would like to know how to use this API to get both Qtree and User Quota...
View Article