Unable to remove foreign aggr OnTap
Hello all, I have a issue I am unable to get around and wanted to see if anyone could provide insight. We brought over a couple of SSD shelves from a different OnTap installation and ofcourse when we...
View Articlendmpd not found after reset Netapp 7.3
hi I met problem here. Due to hd failure, i replace new ones, the re-initlize the disk and reset netapp. But after system start, i found that, ndmpd command is missing, i can't figure it out, could...
View ArticleIn-band ACP functionality
On IOM6s that have been upgraded to supported firmware and configured to use in-band, as well as IOM12s. How does the SAS channel actually issue the reset to the SAS chip / IOM that has stopped...
View ArticleHow do I identify what physical ports being used for intercluster?
::*> network interface show -role intercluster Logical Status Network Current Current IsVserver Interface Admin/Oper Address/Mask Node Port Home----------- ---------- ---------- ------------------...
View ArticleCluster Configuration
Hi All, I am relatively new managing Netapp storage systems. Any help suggestions I can help will be much appreciated. We currently have 10 controllers and a network configuration that has all the lifs...
View ArticleMissing Space in Qtree
Greetings all, This one is a head scratcher. I have a volume which is at 77% capacity, and a qtree within the volume that is at 8% usage, but, the user is unable to move data, only 10GB, to the qtree,...
View Articlevolume-get-iter (SDK 5.7) doesnt shows all volumes under cluster(9.1)
Hi Guys, I am using Netapp SDK 5.7 and below is the sample python code. If I try to list all of the volumes under the cluster it shows only 50+ or sometimes 200+ volumes. I could confirm that the...
View ArticleReporting Nodes Added Automatically When Moving iSCSI-Based Volumes?
A colleague of mine indicated he's never reconfigured reporting nodes when moving volumes containing LUNs from one HA Pair in a cluster to another HA Pair. My understanding from NetApp documentation...
View ArticleNew TR Released: TR-4670 FPolicy Solution Guide for ONTAP: IntraFind
1 Introduction NetApp® FPolicyTM is a file access notification framework that allows users to monitor file access over NFS and CIFS protocols. This feature was introduced in NetApp clustered Data...
View ArticleWhat if vol0 is full?
Hi, I am new to this environment and I am trying to dig out some questions related to root volume of storage system. Q. What impact can be there if the root volume i.e. vol0 is full?Q. What are be the...
View ArticleVolume did not autosized although the volume autosize is set to 20TB
I have a volume that is autosized to 20TB and the threshold is set to 90%. However, the volume got full at 15TB (100%utilized) "Volume autosize is currently ON for volume "XXXXX".The volume is set to...
View ArticleNFS: v4 server .. turned a bad sequence-id error!
Redhat 6.9 on our client Linux box, ONTAP 9.1 P5 Storage layer serverx1 kernel: [1550294.152606] NFS: v4 server netappprd.cof.ds.myorg.com returned a bad sequence-id error!serverx1 kernel:...
View ArticleVol autogrow: Under which log?
Hi, I want to know which of the logs capture the vol autogrow in ONTAP 9.2? Which of the log files capture it? It used to be messages in 7 mode. Thanks in advance. KS
View ArticleONTAP 9.x and volume autogrow - no more manual setting of incremental
Hello all, I need to answer a question put forth by customer regarding volume autgrow. The way it now works, is autogrow and shrink happen in incrementals that are not configurable. ONTAP automatically...
View ArticleDeleting a qtree without it entering snapshots
I recently had a qtree that was quite large and deserved to be its own volume (3 TB, 25 million files), so I migrated it. That all worked fine but when I did a 'qtree delete' to clean up the original...
View ArticleOntap Upgrade from 9.1P8 to 9.1P12 for both cluster mode and 7 mode
Hello Everyone,Can someone please let me know where can I find (or point me in that direction) a ONTAP upgrade plan from 9.1p8 to 9.1p12 for both cluster mode and 7 mode systems.If somone has the...
View ArticleLACP & NetApp 8020
Hi! We test perfomance storage NetApp 8020.Configuration: - 2 x controller FAS8020 with 10Gb nic card- 1 x disk shelf SAS- 2 x disk shelves SATA (SATA + SSDdisk for FlashPool) Each controller is...
View ArticleAggregate level dedupe with NVE
I understand aggregate level deduplication is not supported for volumes encrypted by NVE. Is anyone able to confirm whether or not this is being roadmapped in future releases of OnTap? Thanks!-Ben
View ArticleCan't perform volume rehost on volume in an SVR-DR relationship
Hi all, I want to rehost a volume from SVM1 to SVM2. This would normally be very straightforward, except both SVMs are in SVM-DR relationships. Hence when trying to do a volume rehost, it returns:...
View ArticleSnapMirror Transfer Pauses Randomly
I have four relationships between the same two ONTAP 8.3.2 clusters. Three relationships update every 4 hours in an acceptible time frame.One of the four starts transferring then pauses.... sometimes...
View Article