Hi,
Customer have Windows server with CIFS and NFS share at the same time, that's mean file could allow Windows and UNIX client read/write at the same time.
Customer want to migrate Windows server data to new NetApp, any method or tools could migrate?
We use the fpolicy configurator (version 1.0 of 2016) to exclude file extensions on SVM's. In the past, we have repeatedly had the requirement that we have to release individual file extensions for certain directories so that users can store files there. So far we have done this (quite elaborately) using the following method: Create a share from the affected directory, then create a new group of file extensions in which the file extension is missing, the file of which is to be stored in the directory. This group is then assigned to the volume in which the directory is located using fpolicy commands. All other volumes of the SVM then get the group with all locked file extensions.
Our question now is: is there an easier way to remove an extension for certain directories? Is there a tool if necessary? I hope I was able to convey our concerns clearly. If necessary, I can also provide our procedure using the commands used.
Hi,
My question is regarding Advance disk partition.
1) Can i create one root partition and 1 data partition on newly add disk and put this disk in spare list of drive ?
2) When we replaced failed Disk enable with advance disk partition used in aggregate , should we create ADP partition on this drive first ? or it will create ADP automatically after the replacement with faulty drives?
Thanks
Hi ,
I'm struggling with powershell. I want to know the space used including snapshot reserve on an aggregate.
By default field is empty, i have tried using a template but without success.
Hi
Hardware:
FAS 2240-4 NetApp Release 8.2.4P6 7-Mode 24*1TB-SATA-Disks, FС 8G
Tell me where is the bottleneck for reading.
Netapp disk system reads a maximum of 200 mb / s
I copy a large zip file of 90 gigabytes, a compressed backup copy of the database.
Copying from LUN on fiber channel 4gbit and further on the local network 10 gigabits to a RAID 0 server
I would like to have a speed of ~ 300 mb / s
The disk system cannot handle writing, it shows sysstat well, but I don’t see any bottlenecks with reading
NVRAM bottleneck ???
Hello everyone;
I'm having trouble finding this part. Looking for 15-20 pieces. Is there an alternate part number ??
Thank you in advance,
Rey
Hello,
How I miss ONTAP 9.6 GUI. I just cannot understand what happened at NetApp to change System Manager in such a dramatic way. I am having trouble almost every time I need to find basic information on 9.7 "new experience".
Possibly the problem is on me, but even so, I cannot believe.
I would like to see storage efficiency gains for a specific volume. Where is it?
Regards,
Pedro Rocha.
We want to send logs to another device. Per instructions on the link below, which interface would the logs be sent out from. We have 2 controllers (FAS2650). I am guessing its the cluster management interface. Please confirm.
cluster1::> cluster log-forwarding create -destination 192.168.123.96 -port 514 -facility user
cluster1::> cluster log-forwarding create -destination 192.168.123.98 -port 514 -protocol tcp-encrypted -facility user
Also, what kind of events would it send? Would it be just CIFS access related events?
Thanks,
TT
Can someone help on why I'm failing to access shares on my NetApp
Hello,
we are using ontap 9.5 and provide cifs shares to windows computers.
I want the users to see the real data usage of their files without deduplication. For example:
The user is using 10 tb of data and deduplication reduces this to 8 tb. The volume in this example has the size of 9 tb.
So in windows explorer the user can see the mounted share as a 9 tb volume and 8 tb used space. But he should see the full 10 tb of his data as used storage.
Is there any option or possibility to show him the used data in windows explorer?
Thanks.
We have aggr1_Node03 that contains 22 disks (with 2 hot spares). Those disks are split into 2 RAID groups (each with 11 disks) and there are 2 parity disks per raid group. If we added another DS212C with the same size drives that are currently in the aggregate, can we just increase each RAID group size to 17 disks and add 6 more data disks to each group or will we be required to also add more parity and spare disks?
Hi,
I have a Management Node on my system that is sending pings to a cluster interface that isn't completing the ping and being directed out to the network infrastructure. I only know about it as its showing in that switch's logs sent to the syslog server.
2020-06-26 11:58:39 Local2.Info B1560-38A-R1R3-MGT1-INT 5880379: Jun 26 16:58:38.357 UTC: %SEC-6-IPACCESSLOGDP: list ACL-TRANSIT-MGMT-IN denied icmp 10.2.21.103 -> 169.254.206.17 (0/0), 19 packets
Its as if it cant hit the 169 cluster ip and being directed out with the zero route.
But if I run some basic ping tests and interface checks the system seems to be ok.
****** Sorry for formatting, attached text document**********
B1560-38A-R1R2-FAS::cluster*> cluster ping-cluster -node B1560-38A-R1R2-FAS-02
Host is B1560-38A-R1R2-FAS-02
Getting addresses from network interface table...
Cluster B1560-38A-R1R2-FAS-01_clus1 169.254.64.107 B1560-38A-R1R2-FAS-01 e0a
Cluster B1560-38A-R1R2-FAS-01_clus2 169.254.74.5 B1560-38A-R1R2-FAS-01 e0b
Cluster B1560-38A-R1R2-FAS-01_clus3 169.254.124.178 B1560-38A-R1R2-FAS-01 e0c
Cluster B1560-38A-R1R2-FAS-01_clus4 169.254.212.103 B1560-38A-R1R2-FAS-01 e0d
Cluster B1560-38A-R1R2-FAS-02_clus1 169.254.56.214 B1560-38A-R1R2-FAS-02 e0a
Cluster B1560-38A-R1R2-FAS-02_clus2 169.254.206.17 B1560-38A-R1R2-FAS-02 e0b
Cluster B1560-38A-R1R2-FAS-02_clus3 169.254.160.224 B1560-38A-R1R2-FAS-02 e0c
Cluster B1560-38A-R1R2-FAS-02_clus4 169.254.233.247 B1560-38A-R1R2-FAS-02 e0d
Local = 169.254.56.214 169.254.206.17 169.254.160.224 169.254.233.247
Remote = 169.254.64.107 169.254.74.5 169.254.124.178 169.254.212.103
Cluster Vserver Id = 4294967293
Ping status:
................
Basic connectivity succeeds on 16 path(s)
Basic connectivity fails on 0 path(s)
................................................................
Detected 9000 byte MTU on 16 path(s):
Local 169.254.160.224 to Remote 169.254.124.178
Local 169.254.160.224 to Remote 169.254.212.103
Local 169.254.160.224 to Remote 169.254.64.107
Local 169.254.160.224 to Remote 169.254.74.5
Local 169.254.206.17 to Remote 169.254.124.178
Local 169.254.206.17 to Remote 169.254.212.103
Local 169.254.206.17 to Remote 169.254.64.107
Local 169.254.206.17 to Remote 169.254.74.5
Local 169.254.233.247 to Remote 169.254.124.178
Local 169.254.233.247 to Remote 169.254.212.103
Local 169.254.233.247 to Remote 169.254.64.107
Local 169.254.233.247 to Remote 169.254.74.5
Local 169.254.56.214 to Remote 169.254.124.178
Local 169.254.56.214 to Remote 169.254.212.103
Local 169.254.56.214 to Remote 169.254.64.107
Local 169.254.56.214 to Remote 169.254.74.5
Larger than PMTU communication succeeds on 16 path(s)
RPC status:
4 paths up, 0 paths down (tcp check)
4 paths up, 0 paths down (udp check)
B1560-38A-R1R2-FAS::cluster*> cluster ping-cluster -node B1560-38A-R1R2-FAS-01
Host is B1560-38A-R1R2-FAS-01
Getting addresses from network interface table...
Cluster B1560-38A-R1R2-FAS-01_clus1 169.254.64.107 B1560-38A-R1R2-FAS-01 e0a
Cluster B1560-38A-R1R2-FAS-01_clus2 169.254.74.5 B1560-38A-R1R2-FAS-01 e0b
Cluster B1560-38A-R1R2-FAS-01_clus3 169.254.124.178 B1560-38A-R1R2-FAS-01 e0c
Cluster B1560-38A-R1R2-FAS-01_clus4 169.254.212.103 B1560-38A-R1R2-FAS-01 e0d
Cluster B1560-38A-R1R2-FAS-02_clus1 169.254.56.214 B1560-38A-R1R2-FAS-02 e0a
Cluster B1560-38A-R1R2-FAS-02_clus2 169.254.206.17 B1560-38A-R1R2-FAS-02 e0b
Cluster B1560-38A-R1R2-FAS-02_clus3 169.254.160.224 B1560-38A-R1R2-FAS-02 e0c
Cluster B1560-38A-R1R2-FAS-02_clus4 169.254.233.247 B1560-38A-R1R2-FAS-02 e0d
Local = 169.254.64.107 169.254.74.5 169.254.124.178 169.254.212.103
Remote = 169.254.56.214 169.254.206.17 169.254.160.224 169.254.233.247
Cluster Vserver Id = 4294967293
Ping status:
................
Basic connectivity succeeds on 16 path(s)
Basic connectivity fails on 0 path(s)
................................................................
Detected 9000 byte MTU on 16 path(s):
Local 169.254.124.178 to Remote 169.254.160.224
Local 169.254.124.178 to Remote 169.254.206.17
Local 169.254.124.178 to Remote 169.254.233.247
Local 169.254.124.178 to Remote 169.254.56.214
Local 169.254.212.103 to Remote 169.254.160.224
Local 169.254.212.103 to Remote 169.254.206.17
Local 169.254.212.103 to Remote 169.254.233.247
Local 169.254.212.103 to Remote 169.254.56.214
Local 169.254.64.107 to Remote 169.254.160.224
Local 169.254.64.107 to Remote 169.254.206.17
Local 169.254.64.107 to Remote 169.254.233.247
Local 169.254.64.107 to Remote 169.254.56.214
Local 169.254.74.5 to Remote 169.254.160.224
Local 169.254.74.5 to Remote 169.254.206.17
Local 169.254.74.5 to Remote 169.254.233.247
Local 169.254.74.5 to Remote 169.254.56.214
Larger than PMTU communication succeeds on 16 path(s)
RPC status:
4 paths up, 0 paths down (tcp check)
4 paths up, 0 paths down (udp check)
B1560-38A-R1R2-FAS::cluster*> up
B1560-38A-R1R2-FAS::*> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
B1560-38A-R1R2-FAS
B1560-38A-R1R2-FAS-01_mgmt1
up/up 10.2.21.101/24 B1560-38A-R1R2-FAS-01
e0M true
B1560-38A-R1R2-FAS-02_mgmt1
up/up 10.2.21.103/24 B1560-38A-R1R2-FAS-02
e0M true
cluster_mgmt up/up 10.2.21.100/24 B1560-38A-R1R2-FAS-01
e0M true
Cluster
B1560-38A-R1R2-FAS-01_clus1
up/up 169.254.64.107/16 B1560-38A-R1R2-FAS-01
e0a true
B1560-38A-R1R2-FAS-01_clus2
up/up 169.254.74.5/16 B1560-38A-R1R2-FAS-01
e0b true
B1560-38A-R1R2-FAS-01_clus3
up/up 169.254.124.178/16 B1560-38A-R1R2-FAS-01
e0c true
B1560-38A-R1R2-FAS-01_clus4
up/up 169.254.212.103/16 B1560-38A-R1R2-FAS-01
e0d true
B1560-38A-R1R2-FAS-02_clus1
up/up 169.254.56.214/16 B1560-38A-R1R2-FAS-02
e0a true
B1560-38A-R1R2-FAS-02_clus2
up/up 169.254.206.17/16 B1560-38A-R1R2-FAS-02
e0b true
B1560-38A-R1R2-FAS-02_clus3
up/up 169.254.160.224/16 B1560-38A-R1R2-FAS-02
e0c true
B1560-38A-R1R2-FAS-02_clus4
up/up 169.254.233.247/16 B1560-38A-R1R2-FAS-02
e0d true
jrtc_svm_iscsi
iscsi_1 up/up 10.2.3.1/25 B1560-38A-R1R2-FAS-01
a0a true
iscsi_2 up/up 10.2.4.1/25 B1560-38A-R1R2-FAS-02
a0a true
jrtc_svm_shares
share_1_2003 up/up 10.2.2.9/24 B1560-38A-R1R2-FAS-02
a0b-2003
false
shares_1_2003
up/up 10.2.2.7/24 B1560-38A-R1R2-FAS-01
a0b-2003
true
shares_2_2003
up/up 10.2.2.8/24 B1560-38A-R1R2-FAS-02
a0b-2003
true
shares_3_2004
up/up 10.2.16.2/22 B1560-38A-R1R2-FAS-01
a0b-2004
true
shares_4_2004
up/up 10.2.16.3/22 B1560-38A-R1R2-FAS-02
a0b-2004
true
Press <space> to page down, <return> for next line, or 'q' to quit...
18 entries were displayed.
B1560-38A-R1R2-FAS::*>
application autobalance cluster event
exit history job lun
man metrocluster network protection-type
qos redo rows run
san security set snaplock
snapmirror statistics statistics-v1 storage
storage-service system top up
volume vserver
B1560-38A-R1R2-FAS::*> network port
B1560-38A-R1R2-FAS::network port*> show
Node: B1560-38A-R1R2-FAS-01
Ignore
Speed(Mbps) Health Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status Status
--------- ------------ ---------------- ---- ---- ----------- -------- ------
a0a Default iSCSI up 1500 auto/- healthy false
a0b Default - up 1500 auto/- healthy false
a0b-2003 Default VLAN2003 up 1500 auto/- healthy false
a0b-2004 Default VLAN2004 up 1500 auto/- healthy false
e0M Default Default up 1500 auto/1000 healthy false
e0a Cluster Cluster up 9000 auto/10000 healthy false
e0b Cluster Cluster up 9000 auto/10000 healthy false
e0c Cluster Cluster up 9000 auto/10000 healthy false
e0d Cluster Cluster up 9000 auto/10000 healthy false
e0e Default - up 1500 auto/10000 healthy false
e0f Default - down 1500 auto/- - false
e0g Default - down 1500 auto/- - false
e0h Default - down 1500 auto/- - false
e0i Default - up 1500 auto/1000 healthy false
e0j Default - down 1500 auto/- - false
e0k Default - up 1500 auto/1000 healthy false
e0l Default - down 1500 auto/- - false
e3a Default - down 1500 auto/- - false
e3b Default - up 1500 auto/10000 healthy false
e4a Default - down 1500 auto/- - false
e4b Default - down 1500 auto/- - false
Node: B1560-38A-R1R2-FAS-02
Ignore
Speed(Mbps) Health Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status Status
--------- ------------ ---------------- ---- ---- ----------- -------- ------
a0a Default iSCSI up 1500 auto/- healthy false
a0b Default - up 1500 auto/- healthy false
a0b-2003 Default VLAN2003 up 1500 auto/- healthy false
a0b-2004 Default VLAN2004 up 1500 auto/- healthy false
e0M Default Default up 1500 auto/1000 healthy false
e0a Cluster Cluster up 9000 auto/10000 healthy false
e0b Cluster Cluster up 9000 auto/10000 healthy false
e0c Cluster Cluster up 9000 auto/10000 healthy false
e0d Cluster Cluster up 9000 auto/10000 healthy false
e0e Default - up 1500 auto/10000 healthy false
e0f Default - down 1500 auto/- - false
e0g Default - down 1500 auto/- - false
e0h Default - down 1500 auto/- - false
e0i Default - up 1500 auto/1000 healthy false
e0j Default - down 1500 auto/- - false
e0k Default - up 1500 auto/1000 healthy false
e0l Default - down 1500 auto/- - false
e3a Default - down 1500 auto/- - false
e3b Default - up 1500 auto/10000 healthy false
e4a Default - down 1500 auto/- - false
e4b Default - down 1500 auto/- - false
42 entries were displayed.
****** Sorry for formatting, attached text document**********
Im not sure why .17 is the only one it is sending the ping to and why it is directed out to the network if it can ping it with a test.
Any help is appreciated, this doesnt seem to be a huge issue but it is clogging up our logs.
Thanks
Hi
I have one FAS2050 with ontap 7.3.3 , need to migrate CIFS shares with permission to FAS2720 with ontap 9.6
Can anyone help to provide best way to do this withtwith steps
Regards
Soumil
NetApp NDMP backup with commvault consuming more snap reserve space for large size volume and volumes that are undergoing frequent block level changes . Current protection is NFS =1 hr and iSCSI=3 days.
what would be ideal snapshot policy time to apply to handle write intensive application?
Can we use auto delete for snapshot? which that impact on backup?
Vol Dedup is not enabled. planning to enable this. hoping to reduce snapshot size.
Hello,
on my 7-mode lab system i got this message: BGNA108061:monitor.shelf.warning:warning]: Fault reported on disk storage shelf attached to channel 0a. Check fans, power supplies, disks, and temperature sensors
And also the fault LED is on at shelf ID 75
In reference to this kb article (https://kb.netapp.com/Advice_and_Troubleshooting%2FData_Storage_Systems%2FFAS_Systems%2FDisk_shelf_reports_the_critical_warning__%22non-critical_status%3B_Backplane_VPD_SEEROM_corrupt_or_unreadable.%22)
my results are:
BGNA108061*> sasadmin expander_cli 0a.75 "vpd midplane_compare"
Mismatch detected
VPD 16 - 0180: 01 01 02 01 01 01 01 85 02 01 01 01 01 01 02 01
VPD 17 - 0180: 01 01 02 01 01 01 01 05 02 01 01 01 01 01 02 01
midplane_compare test completed. There were mismatches
At the kb-article there is a reference to netapp support but the system is a lab-system and out of support.
Can anyone advise me how to fix vpd mismatch?
Thanks in advance for your help
bye Udo
We're in a bit of a pickle.
In our lab, we have a NetApp appliance running ONTAP 9.6. It was integrated with an external key manager several months ago that was reconfigured. There's one encrypted volume on the appliance that we don't care about. The appliance can no longer communicate with the key manager, but we've loaded new certificates on it to be able to re-establish communication.
This is essentially the same situation that you'd encounter if you let a certificate expire, so I'm following those instructions here: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-nve%2FGUID-D457F0DF-420A-4FE7-A782-040878F0D000.html
When I attempt to remove the server as instructed, I'm told I can't because there's an encrypted volume.
SAT-NVE::*> security key-manager external remove-servers -vserver SAT-NVE -key-servers 10.106.189.27:5696
Error: command failed: The key server at "10.106.189.27" contains volume encryption keys that are currently in use and not available from any other configured key server.
When I attempt to delete the encrypted volume, I can't do that because it can't reach the external key manager.
SAT-NVE::*> volume delete -vserver SAT-01 -volume EncryptedVM
Error: command failed: One or more key servers are unavailable for Vserver "SAT-NVE". Use the "security key-manager external show-status -vserver SAT-NVE" command to check the status of the key servers. Verify that the network configuration is correct.
The -force attribute didn't help.
How do I get out of this loop?
Thanks.
Jane
Hi Everyone..
Actually we have FAS2240 with Data Ontap 8.1.4P1 7-Mode and Filer-A had failed. So we have replaced with New one.
But unfortunately forgot to swap Flash Card from failed filer to new filer.
In result the New Filer is having Ontap 8.2P3 7-Mode has been configured that newer version then we have in out system.
So system is running but Takeover feature has been disabled due to ontap mismatch.
strga> cf status
strgb is up, takeover disabled because of reason (version mismatch)
strga has disabled takeover by strgb (version mismatch)
NVRAM TOC: Local 29 Partner 23
WAFL FSInfo: Local 23589 Partner 22331
WAFL log: Local 396 Partner 334
RAID: Local 12 Partner 11
RAID NVRAM: Local 42 Partner 33
VIA Interconnect is up (link up).
So now we have two options here, one need to upgrade Filer-B to 8.2P3 or downgrade Filer-A to 8.1.4P1.
But to perform both we need those Ontap Firmware. we have tried to search Netapp Support but unable to find any version blow 8.5
So I need help here if someone pls share link to download above version will be really helpful to me
Thank You
Hi,
I have a CIFS share which usage size has been reduced from 16tb to 10tb. If I resize the volume to 12tb from 16tb, will I get that 4tb back? Can it be done on a live share?
Thanks
Hi,
Is there any Netapp or other tool to generate generic workload performance report based on capacity (SAS & SSD) for FAS storage system .
Can you resize the root volume like any other volume? We are looking to forward the audit logs to an external device and was told it will take up some space if we turn it on.
From the OnCommand Manager it shows.
cm_svm_root volume (shows as volumes on SVM).
Thanks,
TT
